Today I finished piecing the hexagonal boxes together and finished my project. I ran into a few roadblocks along the way though. In order to get a good shape for the boxes, the pieces had to be glued together quickly which was a little hectic when the glue began dripping. After I glued ad strapped them together though it was quick work with the pin nailer, nailing each piece in on each side/angle in order to get the tightest fit.
Here's some of the finished boxes:
My next challenge was geometrically fitting the boxes together. Since they're not really perfect I had to use quite a bit of clamps in order to hold them in the right place as I glued and screwed them together. Once finished, i sanded all of the rough edges and made sure the face of the design was sanded, Heres the finished product:
No comments:
Post a Comment